友情链接: 新普京网 新普京网址 威尼斯人官网 澳门威尼斯人网站 网上威尼斯人 威尼斯人赌博 手机电子老虎机app 电子老虎机网址 电子竞技博彩 电子游艺平台大全 在线电子赌博 电子游艺代理 大发代理 娱乐棋牌网 电子娱乐平台网址 信誉最好的平台 巴黎人赌场 网上电子游戏平台 澳门电子游戏平台 手机现金打鱼 电子游艺网投 电子游戏网络平台 现金捕鱼 巴黎人代理 老虎机国际娱乐 mg官网 mg平台送彩金 MG游戏试玩 电子游戏试玩 老虎机游戏平台 老虎机棋牌游戏 赌博评级网 靠谱真人平台 电子老虎机游戏 电子游戏厅 捕鱼游戏 bbin直营平台 澳门葡京平台 棋牌老平台 网上正规投注网址 电子游艺赌博 在线老虎机娱乐平台 十大电子游戏平台 热门电子博彩 银河代理 澳门真人棋牌 棋牌下载app 澳门电子游戏代理 开元棋牌游戏 澳门拉斯维加斯 电子游艺平台赌博 在线真人平台 威尼斯棋牌 新濠天地代理 永利代理 真金棋牌app 电子游艺网站排行榜 澳门娱乐网址平台 电子游戏官网大全 棋牌平台 电子游艺真人平台 快三平台
Prototype vitreous enameling | Metalstar Prototype

Prototype Vitreous Enameling

vitreous-enamellings

Metalstar Prototype vitreous enameling factory is located in Foshan city, China. Foshan City is the well-known area offering highest grade vitreous enamel service in China. Benefited from the regional advantage and cooperated with our contracted subcontractors, we are able to deliver high quality enameling coated prototype in variety of colors, and the part size can go up to 39.0 inches * 43.0 inches(length* width).

Vitreous enamel, also called porcelain enamel, is a material made by fusing powdered glass to a substrate by firing, usually between 750 and 850 °C (1,380 and 1,560 °F). The powder melts, flows, and then hardens to a smooth, durable vitreous coating on metal, or on glass or ceramics. Vitreous enamel can be applied to most metals.

For prototype parts required to apply vitreous enamel coating(including deep drawn sheet metal prototype), the raw material must be specific low-carbon steel. This type of specific low-carbon steel has already been applied with some specific treatments based on common low-carbon steel, with these specific treatments or improvements, it can finally get high quality enameling coated parts without bubbles, needle hole and especially the scale chipping issues.  Thus, the correct raw steel material selection is one of the key factors to get high quality enameling coated parts. On other hand, during the part fabricating phase, the fabricating processes and methods also need to be well planned and managed to get final high quality enameling coated parts. For example, the welded area is quite sensitive to enameling quality, usually those welded areas are easily found with enameling chipping issue, so it needs to avoid welding or strictly controlling welding area and welding technology.

Start your project today! The team at Metalstar Prototype is always fulfilled with passion and professionalism to assist you to turn your innovative ideas into practical solution.

Click Here to Get a Project Review and Quote for Free